Straw briquetting machine
|model||Host size||main motor power||Environment inner diameter||Hourly||weight|
Straw briquetting machine is a device for crushing and compressing biomass materials such as straw into high-efficiency, environmentally friendly fuel or feed. The products extruded by the straw briquetting machine are used as feed or fuel. After practice and continuous improvement, the straw briquetting machine has become more and more perfect. The straw briquetting machine has the advantages of high degree of automation, high output, low price, low power consumption, simple operation, and pollution-free environment. Therefore, the straw briquetting machine can be widely used to press various crop straws and twigs and other biomass materials.
The design structure of the straw briquetting machine is derived from the pellet machine. There are three types of straw briquetting machines in China: mechanical, hydraulic, and screw extrusion.
Straw fuel (ie biofuel) uses solid waste such as corn stalks, wheat straw, rice straw, peanut husks, corn cobs, cotton stalks, soybean stalks, weeds, branches, leaves, sawdust, and bark of crops as raw materials. Crushing, pressurizing, densifying, and forming into small rod-shaped solid particle fuels, etc., compressed and carbonized to form modern clean fuels, which are also emerging special fuels for biomass power generation, and can also be directly used in urban traditional coal-fired boiler equipment. Can replace traditional coal.
The SZLH-768 new vertical ring die pellet and briquetting machine is a new generation of pellet fuel that is independently developed by our company based on the diversified preparation requirements of biomass fuels. It uses wood chips, chaff, straw and other agricultural and forestry wastes as raw materials. Molding equipment, this product solves the problems of difficulty in granulating a variety of coarse fibers and soft fibers and poor results. It has been widely used by customers. The product has stable performance, high output and low energy consumption.
The whole machine adopts two-stage transmission, the first stage is driven by a powerful triangle belt, and the second stage is driven by high-precision gears. The operation is stable, reliable and durable. Vertical feeding, uniform distribution, large output and low energy consumption. The mold is stationary, the pressure roller rotates, the material is centrifuged, and the material is uniform. The mold has a double-layer design, and the upper and lower sides are alternately used to reduce operating costs. Annular mold, vertical structure, good for heat dissipation and cooling of the particle chamber. The unique frequency conversion feeding device ensures the stability of the feeding. The oil cooling of the main shaft effectively reduces the temperature of the gear oil in the transmission device and ensures the normal operation of the machine. The equipment has compact structure, safety, low noise, low failure and small floor space. Closed feeding, negative pressure recovery of dust, clean working environment, no slag for granular products.
|Structure type||Vertical||Molded hole size||6-12mm|
|Specification model||SZLH-768||Number of rollers||3|
|Main motor||YX3-315L1-6-V1-110KW||Diameter of pressure roller||230mm|
|Structural quality||6800kg||Required raw material moisture content||10-12%(Except for individual raw materials)|
|Roller speed||85r/min||Ring die inner diameter||768mm|
|Feeding motor||YX3-100L2-4-3kw Frequency conversion/BWD2-35-3KW|
|Cooling the motor||YX3-80M2-4-0.75KW-220V||Cooler||AH0608TL-CA-220v|
|Press block mold base||Inner diameter 768mm||Compression sleeve aperture||25mm|
|Number of briquetting holes||90 only|
Sawdust Pellet Machine
Straw Briquetting Machine
Biomass Pellet Machine
Biomass Hot Water Boiler
Hot Water Boiler
If you are interested in our products and services, welcome to fill in your intentions and needs, we will contact you as soon as possible!!
- Mobile Site
- Tel 0086-519-87838999
- Phone +86 18205276156
- E-mail email@example.com